Singleturn Potentiometer

   
 
LP11 Ltz
T18  also as D2
LPT 18 also as D2
DP18
also as D2 / D3
Datasheet
Shaft
Ø6x9 (D-Profil)
Ø6x20 mm
Ø6x20
Ø6x20
Overall dimension
16 x 20 x 17 mm
(without shaft)
Ø22x19.3 / 30.1 mm
(without shaft)
Ø22x19.3 / 30.1 mm
(without shaft)
Ø22x22 / 33 / 45 mm
(without shaft)
Mounting type
M10 x 0.75
M10 x 0.75
M10 x 0.75
M10 x 0.75
Torque
2.5 up to 6.0 Ncm
(0.5 up to1.5 optionally)
Up to 1.0 Ncm
 Up to 1.5 Ncm
 Up to 1.0 Ncm
Rotation angles electrical / mechanical
310°/320°
320°/320° 
optionally endless rotation 
320°/320°
330°/330°
optionally endless rotation
Life cycle
1 x 10⁶ slider path (360°)
1 x 10⁶ slider path (360°)
1 x 10⁶ slider path (360°)
1 x 10⁶ slider path  (360°)
Type of connection
Terminal Wires 0.5E2
Plug Connection,
Terminal Wires
Solder Connection / Plug Connection,
Terminal Wires
Solder Connection/ Plug Connection,
PCB Connection,
Terminal Wires,
Terminal Block
Resistor element
Conductive Plastic
Wire-Wound
Conductive Plastic
Wire-Wound
Resistance values+ tolerance
10 K-Ohm 
± 20%
1, 2, 5, 10 K-Ohm
± 5% 
1, 2, 5, 10 K-Ohm
± 10% (± 15%)
1, 2, 5, 10 K-Ohm
± 5% (± 3%)
Linearity
±2%
±0,5% 
±2%
±0,5% 
Sensor output
-
-
-
-
Centre tap
-
-
-
-
Application/ Market segment
Power Tools
Power Tools
Mechanical Engineering and Construction, Industrial Equipment
Mechanical Engineering and Construction, Industrial Equipment
Characteristics
• Compact construction
 
• Optionally with metal reinforced axis
 
• Housing with integrated thread
• Fibreglass reinforced plastic housing
 
• High strength and heat resistance
 
• Maintenance-free sliding bearing
 
• Optionally up to protection class IP67
 
• tackable
• Fibreglass reinforced plastic housing.
 
• High strength and heat resistance.
 
• Maintenance-free sliding bearing.
 
• Stackable
• Fibreglass reinforced plastic housing
 
• High strength and heat resistance
 
• Maintenance-free sliding bearing.
 
• Stackable
 
• Optionally shaft on both sides

 

 

 
 
 
DP113 Ze
also as D2/D3
DP113 Sy KL
DP113 M Ze
 
DP113 Ze Hv
Datasheet
Shaft
Ø6x20 mm
Ø6x20
Ø6x20
Ø6x20
Overall dimension
Ø36.5x33 / 47 / 61 mm
(without shaft)
Ø36.5x20.5 mm
(without shaft)
Ø36.5x47 mm
(without shaft)
Ø36.5x54.5 mm
(without shaft)
Mounting type
M12 x 1
Clamping Claws
Clamping Claws
M12 x 1
Torgue
Up to 0.4 Ncm
Up to 0.4 Ncm
Up to 0.5 Ncm
Up to 6.0 up to 13.0 Ncm
Rotation angles electrical / mechanical
345°/ endless rotation
345°/ endless rotation
345°/345°
330°/330°
Life cycle
10 x 10⁶ slide path (360°)
10 x 10⁶ slide path (360°)
10 x 10⁶ slide path (360°)
1 x 10⁶ slide path (360°)
Type of connection
Solder/ Clamp Connection,
Cable Connection
Solder/ Clamp Connection,
Cable Connection
Solder/ Clamp Connection,
Cable Connection
Solder/ Clamp Connection,
Cable Connection
Resistor element
Wire-Wound
Wire-Wound
          Wire-Wound
Wire-Wound
Resistance values+ tolerance
1, 2, 5, 10 K-Ohm ± 3%
1, 2, 5, 10 K-Ohm ± 3% 
0/4 ... 20 A ± 0,04 mA
0 ... 10V ±0,03V
1, 2, 5, 10 K-Ohm ± 3%  
Linearity
±0,3% 
±0,3%
±0,3%
±0,3%
Sensor output
+
+
-
+
Centre tap
+
+
-
+
Application/ Market segment
Mechanical Engineering and Construction, Industrial Equipment
Mechanical Engineering and Construction, Industrial Equipment
Mechanical Engineering and Construction, Industrial Equipment
Mechanical Engineering and Construction, Industrial Equipment
Characteristics
• High-quality and robust aluminium housing
 
• High radial axle load
 
• Stackable up to 3 high
 
• Oilfilling is possible
 
• Ball bearing
• High-quality and robust aluminium housing
 
• High radial axle load
 
• Stackable up to 3 high
 
• Oilfilling is possible
 
• Ball bearing
• High-quality and robust aluminium housing

• Sensor output
 
• Ball bearing
 
• Synchro-mounting is possible
 
• Oilfilling is possible
 
• Stackable
• High-quality and robust aluminium housing

• Sliding bearing for rough industrial use

• Stackable 2 high

• Sensor output is possible

 

 

 
 
 
DP120 Ze also as D2
DP120 Sy also as D2
DP120-47 Lt 
 
DP18 Sy
Datasheet
Shaft
Ø6x20 mm
Ø6x20
Ø6x10
Ø3x15
Overall dimension
Ø50.8x36.5 / 53.5 mm
(without shaft)
Ø50.8x28 / 45 mm
(without shaft)
M12x1 / 2 x M4
Ø22x15.5 mm
(without shaft)
Mounting type
M12x1
Clamping Claws
M12x1 / 2 x M4
Clamping Claws
Torque
Up to 0.4 Ncm
0.3 up to 0.4 Ncm
Up to 1.0 Ncm
0.2 up to 0.3 Ncm
Rotation angles electrical / mechanical
345°/ endless rotation
345°/ endless rotation
285°/ 345°
330°/330°
Life cycle
10 x 10⁶ slider path (360°)
10 x 10⁶ slider path (360°)
1 x 10⁶ slide path (360°)
10 x 10⁶ slider path (360°)
Type of connection
Solder/ Clamp Connection,
Cable Connection
Solder/ Clamp Connection,
Cable Connection
Solder Connection
Solder Connection/ Plug Connection,
PCB Connection,
Terminal Wires,
Terminal Block
Resistor element
Wire-Wound
Wire-Wound
Wire-Wound
Wire-Wound
Resistance values+ tolerance
1, 2, 5, 10 K-Ohm ±3%
1, 2, 5, 10 K-Ohm ±3% 
1, 2, 5, 10 K-Ohm ± 3% 
1, 2, 5, 10 K-Ohm ± 5%  
Linearity
±0,3% 
±0,3%
±0,3% 
±0,5%
Sensor output
+
+
-
-
Centre tap
+
+
+
-
Application/ Market segment
Mechanical Engineering and Construction, Industrial Equipment
Mechanical Engineering and Construction, Industrial Equipment
Vehicle Construction
Mechanical Engineering and Construction, Industrial Equipment
Characteristics
• High-quality and robust aluminium housing

• Sensor output is possible
 
• Oilfilling is possible
 
• Ball bearing
• High-quality and robust
aluminium housing

• Sensor output is possible
 
• Oilfilling is possible
 
• Ball bearing
• Fibreglass reinforced plastic housing
 
• High strength and heat resistance
 
• Maintenace-free sliding bearing
 
• Screw and central fixing
• Fibreglass reinforced plastic housing
 
• High strength and heat resistance
 
• Maintenace-free sliding bearing

 

 

 
 
 
F25R / RU
F25R V1
F25RM+Sensor
 
F25Z Varianten
Datasheet
Shaft
Ø1.5 x 6.0 mm
Ø1.0 x 6.0 mm
Ø1.0 x 6.0 mm
coupling fork
Overall dimension
Ø35x20 (without shaft)
Ø35x20 (without shaft)
Ø35x41(without shaft)
Ø35x20 + foot
Mounting type
Synchro flange
screw type M2
Synchro flange
screw type M2
Synchro flange
screw type M2
Screw by using the foot
Torgue
0.003 Ncm / 0.004 Ncm
0.003 Ncm
0.003 Ncm
0,002 up to 0,006 Ncm
Rotation angles electrical / mechanical
290°/290° / 358°/360°
290° / 290°
270° / 270°
290°/290°
Life cycle
50 x 10⁶ slider path (360°)
50 x 10⁶ slider path (360°)
50 x 10⁶ slider path (360°)
50 x 10⁶ slider path (360°)
Type of connection
Terminal Wires
Terminal Wires
Terminal Wires
Solder Connection,
Terminal Block
Resistor element
Wire-Wound
         Wire-Wound
Wire-Wound
Wire-Wound
Resistance values+ tolerance
1, 2, 5 KOhm ±3%
1, 2, 5 KOhm ±3%
0/4…20 mA ± 0,04mA 
0…10 V ± 0,03V
1,2,5 K-Ohm ± 3%
Linearity
±0,3% 
±0,3%
±0,3% 
±0,3%
Sensor output
+
+
+
+
Centre tap
-
-
-
-
Application/ Market segment
Moisture and Wind Measurement
Moisture and Wind Measurement
Moisture and Wind Measurement
Moisture and Wind Measurement
Characteristics
• Extremely low torque

• Integrable measuring transducer

• Especially suitable for measuring instruments with pointer function

• Long operating life

• Auminium housing
• Extremely low torque

• Integrable measuring transducer

• Especially suitable for measuring instruments with pointer function

• Long operating life

• Plastic housing
• Extremely low torque

• Integrable measuring transducer

• Especially suitable for measuring instruments with pointer function

• Long operating life

• Aluminium housing
• Extremely low torque

• Integrable measuring transducer

• Especially suitable for measuring instruments with pointer function

• Long operating life
 
• Clock-face set-up version

• Aluminium housing